Syringe / Cartridge Labelling Solutions

;

 Vial labelling    Device labelling   Small Batch Packaging   Home

;

 

Facts / Specifications

Products: Syringes
Product material: Glass and plastic
Tray materials: POM or PE or ABS (If 3D printed), Weight 440g (3D printed is ligther) 
Height: 2200 mm
Machine capacity: 30 / minute
Tolerance: ± 0,3 mm along the syringe, measured from a fixed point/lione on the label
 
 

 

;

Facts / Specifications

Products: Prefilled Syringes w. fingergrip + tip cap
Product material: Plastic or Glass
Label print: TTO print
Machine capacity: 60 products per minute
In-line production
Vision inspection of label presence and position on cartridges
Tolerance :
± 0,5mm Label Placement on height of device.
Skew ≤ 1°
 

   Autodesk viewer

;

Facts / Specifications

Products: Prefilled Syringes
Product material: Plastic or Glass
Label print: No print, only colour code label
Machine capacity: 600 products per minute
In-line production
Inspection with: Sensors and/or Vision
Inspection of: Print, Colour and Label placement
Axial Tolerance : ± 1 mm
 

   Autodesk viewer

;

Facts / Specifications

Products: Syringes
Product material: Plastic or glass
Label print: With laser
Machine capacity: Depending if it is manual infeed as shown here, or infeed from in-line up-stream 
 
Sensor inspection and reject functions of:
  • Syringe (Air bubbles, Missing content, Dark content, liquid between ribs and tip cap closure)
  • Label print before application
    - Batch data
    - Manufacturing date
    - Batch number
    - GTIN number
    - (Serial number)
    - 2D code (UDI)
  • Label presence and placement on the syringe

   Autodesk viewer

;

 

Facts / Specifications

Products: Cartridges
Product material: Glass and plastic
Label material: Paper, PP, PE
Tray handling system
Machine capacity: Minimum of 38 labeled and vision inspected cartridges/min
Vision inspection of label presence and position on cartridges
Tolerance: +/- 0,2 mm
 

   Autodesk viewer